Heavy-duty Commercial Drain Pump Makes Renovations Possible

Revival Brewery Company offers a particular craft beer experience that appeals to everyone. It is a renewal of brewmaster Sean Larkin’s passion for distinctive and innovative craft beers, cultivated over twenty years of creating signature brews for the preeminent breweries in Rhode Island.
Though he’d been excited about hanging out on his personal for a few years, it was an introduction to avid house brewer Owen Johnson in late 2009 that set in motion what would turn out to be Revival. After many nights of brainstorming, Revival Brewery Company determined to reinvent itself in a post-pandemic world with the timeless mixture of beer and pizza. The owners created Revival Brewing and Lost Valley Pizza, a brewpub and pizzeria positioned within the Valley neighborhood of Providence, Rhode Island.
After reopening the brewpub in a new building, the owners had varied tasks lined up to enhance the house, together with extra loos and a model new bar area.
However, the brewery’s new location posed a difficult plumbing situation. According to Geoff O’Leary, owner of O’Leary Plumbing and Heating, they’d initially planned to install conventional underground drain strains, but “during the initial construction of the brewery, they utilized a space with none plumbing plans obtainable, so we had no thought what the plumbing setup seemed like,” explains O’Leary.
“We knew there have been drain lines within the floor, however we didn’t know where we wished to install the restrooms or the bar space,” he continues. “We later realized the concrete was three feet thick, making any new plumbing installation particularly troublesome and costly.”
PROBLEM
Thankfully, O’Leary knew of a product he had been using over the entire span of his twenty-year plumbing profession: Saniflo’s above-floor plumbing pumps, a solution that may allow them to install plumbing without needing to break by way of that 3-inch-thick concrete to put in new drain traces.
“I’ve been utilizing Saniflo’s residential line of macerator pumps because it was first launched within the United States,” says O’Leary, who serves the Eastern, North, and South Shores in Massachusetts providing residential and business plumbing services.
After presenting the challenges they have been going through at the brewery to producers consultant Walter F. Morris, they introduced him to Saniflo’s industrial line of drain pumps and raise stations. เกจแรงดันลม ’s Sanicom 2 to deal with the drainage for a new bar space. Walter F. Morris also recommended Saniflo’s Sanicubic 2 to handle two unisex restrooms. Down the road, the brewery confronted further points once they needed to add a sink close to the pizza oven per the Health Board’s request and, again, when they finally started the development of the brand new bar space.
SOLUTION
After studying more about Saniflo’s Sanicom 2 business drain pump and the Sanicubic 2 raise station, O’Leary knew it will remedy the brewery’s original concrete trenching points.
“The Sanicubic set the standard for the brewery and helped out tremendously, as a result of we could go from one workers rest room to offering two bogs for the basic public,” O’Leary explains.
After successfully opening and offering the necessary amenities to clients, the brewery had to add a hand sink near the pizza oven. O’Leary explains there were no drain pipes out there shut enough to the oven, in order that they needed to discover one other Saniflo resolution. O’Leary determined to put in the Saniswift drain pump, which enabled them to tie into the prevailing drain line, situated above the doorway nearly 30 ft away from the new hand sink.
Soon after, Revival Brewing and Lost Valley Pizza was ready to start the development of the model new bar area. The bar would come with two washing machines, a three-base sink, and ice bins. The new Sanicom 2 served because the plumbing resolution for the bar area. The Sanicom 2 is a heavy-duty duplex drain pump designed for purposes requiring grey water elimination for industrial needs.
Recently introduced into the market, the Sanicom 2 comes equipped with a pair of 2-horsepower, 220-volt motors for dealing with multiple industrial fixtures that should course of massive volumes of high-temperature water, grease or chemical compounds. The duplex drain pump can move up to 140 gallons of fluid per minute, with each pumps mechanically activating simultaneously when the incoming circulate rate exceeds that of a single pump.
Other key options of the Sanicom 2 embrace:
Easy entry for servicing: The Sanicom 2 has been designed to maintain maintenance to a minimum. If servicing is needed, the two motors, electrical components, pressure-level switches, and dip tubes are all readily accessible and easily eliminated.
Fail-safe activation: A fail-proof sensing mechanism system for detecting the water level contained in the Sanicom 2 consists of three strain switches, every put in in its personal internal dip tube. With three different switches, it’s nearly unimaginable for the unit to fail to activate with incoming fluids.
Control Panel: The unit comes outfitted with an external wired management panel with override buttons and LED energy and alarm indicators. An exterior alarm box is optional.
Nationwide Compliance: IAPMO-listed and carrying the UPC (Uniform Plumbing Code) logo, the Sanicom 2’s duplex expertise is an excellent match for so much of U.S. locales and jurisdictions.
Like the Sanicom 1 drain pump, the new duplex model can handle fluids up to 194 levels Fahrenheit (90 levels Celsius), making it best for industrial-scale dishwashers, industrial washing machines, hydroponic crop growing, and another business and industrial functions requiring wastewater evacuation. With horsepower rankings higher than different Saniflo systems, the Sanicom 2 discharges effluent via a 1.5-inch pipe vertically 32 toes and/or horizontally 390 feet. The pump comes equipped with built-in verify valves on the discharge of every motor.
Accommodating the brewery’s new bar, the Sanicom 2 pumps the wastewater from three fixtures 15-feet vertically and then 30-plus-feet horizontally through a 1.5-inch discharge pipe. At a quarter-inch slope per foot, the discharge then runs into the main drain on the opposite aspect of the wall.
RESULTS
“Depending upon the length of your run into a drain line, it might take as little as an hour to put in the Sanicom 2,” says O’Leary approvingly. “But it was a twelve-hour job for us on the brewery, because we had a lot of piping to run and needed to install venting.”
According to O’Leary, the set up was very simple and went smoothly for him and his team. “We effortlessly related the drain strains to the pump and put in a shut-off for the ejection side for upkeep down the road,” he says, including, “I was amazed how high and much the Sanicom 2 is ready to pump the drain water to the sewer line, but the unit itself tucks right under the bar.”
Besides not obstructing the bartenders or the workers, the Sanicom 2 offers easily accessible electrical hookups, according to O’Leary: “The electrician raved about how simple and easy it was to make connections.”
O’Leary reviews that “the bar is now up and running, and the owner’s suggestions has been unbelievably positive”—thanks in no small half to Saniflo’s heavy-duty industrial drain pumps and lifting station.
CLIENT CLOSE-UP: REVIVAL BREWING COMPANY
Revival Brewing Company is a centered on the brewmaster’s ardour for unique and progressive craft beers, cultivated over twenty years of creating signature brews for the preeminent breweries in Rhode Island.
For extra information, go to www.revivalbrewing.com.
Share

Leave a Comment