Hydrogen Testing Facilities at TÜV SÜD National Engineering Laboratory

How TÜV SÜD are serving to to handle technical challenges
As part of the worldwide drive to scale back greenhouse gasoline emissions there is a pressing need to move towards clean fuels for power. The use of hydrogen as a substitute for pure gas within the gasoline grid networks is seen as a significant contributor to assembly this goal. Manufacturers, gas community companies and governments are working closely together to handle numerous technical challenges earlier than this alteration can turn out to be a actuality. TÜV SÜD ความหมายของเครื่องวัดความดัน is a world-leading centre for flow metrology research and improvement. To help tackle these challenges, it’s building a variety of hydrogen tests amenities. These facilities include the Hydrogen Domestic Gas Metering Test Facility, developed for testing smaller scale equipment at lower pressures, coupled with the development of a fuel primary circulate commonplace take a look at facility, which provides decrease measurement uncertainty and higher options for fundamental metrology research, in addition to greater hydrogen circulate rate and pressure ranges. This article describes the prevailing hydrogen test services and people underneath improvement at TÜV SÜD National Engineering Laboratory.
The hydrogen domestic fuel metering test facility has been developed to provide a platform to research not only the performance of move meters, but additionally for different gear related to hydrogen operation, together with management valves, PRVs, regulators, warmth exchangers, and so forth. in a hydrogen service. The take a look at facility has been developed for small scale functions and can ship a variety of gas flows together with hydrogen, methane, nitrogen or mixtures of hydrogen and methane. The take a look at facility is capable of delivering as much as 38 Sm3/h of hydrogen to the system underneath test at line pressures as a lot as 1500 mbar, with temperatures ranging from -25 to 55 ˚C. It can operate with line sizes ranging from 5 to twenty mm. Construction was accomplished last 12 months and it is now out there to be used by industry for product improvement or circulate testing of hydrogen gear and valves.
The switch over from natural fuel to hydrogen may happen in a staged method involving hydrogen/natural gasoline blends or direct swap to pure hydrogen. Manufacturers can perform a whole evaluation of equipment efficiency throughout a spread of hydrogen to pure gasoline compositions from zero to 100% hydrogen.
The hydrogen domestic fuel metering take a look at facility has been specifically designed for low-pressure hydrogen purposes and TÜV SÜD recognised that there was additionally a necessity for a bigger circulate, greater strain take a look at facility. TÜV SÜD has undertaken a project underneath the BEIS-funded Flow Programme to ascertain a Gas Primary Flow Standard Test Facility. Initially, it’ll function with hydrogen, nitrogen and methane but with a view to be prolonged to carbon dioxide. The facility is presently in the detailed design stage and the plan is to have an working envelope of as much as a hundred Sm3/hr of gas with the ability to operate as much as 120 bar.
For more information on how TÜV SÜD National Engineering Laboratory might help together with your valve move testing needs, contact Marc MacDonald on marc.macdonald@tuvsud.com

Leave a Comment