iMist helps FPA laboratory gain UKAS accreditation and undertakes testing into additional system purposes

iMist, one of many UK’s foremost suppliers of high-pressure water-mist fire-suppression systems, has worked with main trade body the Fire Protection Association (FPA), to help it achieve UKAS accreditation for one of its fire-testing laboratory amenities – changing into the first and only take a look at facility within the UK to hold this accreditation.
The fast-growing Hull-headquartered enterprise, which has developed its personal range of high-pressure water-mist fire-suppression methods, assisted the FPA in gaining UKAS accreditation for its BS8458: 2015 Annex C hearth testing in Blockley, Gloucestershire, which is doubtless considered one of the most complete hearth test and analysis operations in the UK. ร้านซ่อมเครื่องวัดความดัน supplied the FPA with its proprietary pumps, pipework, hoses, clips and nozzles in addition to the assist of iMist’s skilled group.
The UKAS accreditation of the FPA’s BS 8458 Annex C fire testing marks another essential milestone in the improvement of water-mist techniques in the UK.
Alex Pollard, operations director of iMist, comments: ‘For over 75 years, the FPA has been at the forefront of fire safety and we’re proud to have assisted them in reaching this respected third-party accreditation. It is an extra demonstration of the growing importance of high-pressure water-mist methods in tackling the current challenges going through the fire-suppression sector. Not only do they use considerably less water than conventional sprinkler systems, they’re also simpler and faster to install and, thereby, more economical.’
As a half of its ongoing R&D product testing programme, iMist has also undertaken a sequence of stay fire testing on the FPA’s UKAS accredited laboratory, which has increased the system’s applications, demonstrating that along with being installed within the cavity above the ceiling, the iMist system pipework can safely and successfully be installed under a plasterboard ceiling.
For the stay hearth checks, the iMist nozzle was fed by both versatile and solid pipework operating beneath a normal plasterboard ceiling. In every of the checks, the fuel load was ignited and the heat from the hearth caused the bulb within the nozzle to burst, which activated the iMist high-pressure water-mist system, discharging the nice water-mist particles at high pressure for half-hour. During this time, the temperatures at predetermined heights in the test cell had been measured by thermocouples. At no level during any of the tests had been any of the Annex C temperature limits breached and the entire fires had been efficiently suppressed.
Timothy Andrews, iMist enterprise growth director, added: ‘While hearth system pipework is normally installed within the cavity above a ceiling, in some properties, particularly in older tower blocks, there are frequent points around the attainable break-up of asbestos hidden in ceiling supplies. Our latest indicative tests show that the housing business can now explore one other less disruptive and extremely effective choice by putting in a water-mist system below the present ceiling. Given the rising need to retrospectively fit fire-suppression techniques in order to meet the latest regulatory requirements and bring older housing inventory as a lot as current standards, that is nice information for both landlords and developers.’
For more information: imist.com
Share

Leave a Comment