What’s the dissipation loss for a pressure transmitter?

The term ?dissipation loss? are Wealth in the info sheet for a pressure sensor or pressure transmitter. One needs this specification in order to be able to protect the pressure sensor from overheating.
In case a pressure sensor is operated in a hot environment, it really is necessary to limit its electrical power. If one neglects this aspect, one possibly risks an overheating sufficient reason for this, in the worst case, a total failure of the instrument. Just how can the correct electrical connection be managed?
Determination of the right electrical connection on the basis of the dissipation loss
First, the maximum permissible electrical power for the pressure sensor must be known. That is given in the info sheet because the dissipation loss. Please be aware that the dissipation loss can be dependent upon the maximum expected operating temperature of the instrument and should be calculated where necessary.
If the allowable dissipation loss has been determined correctly, then your actual maximum electrical energy for the pressure sensor that occurs can be determined. The determination can be carried out expediently in two steps:
1. Determination of the voltage at the pressure transmitter using the following formula:
UPressure transmitter = UVoltage source ? RLoad � Imax. Soaring . Calculation of the maximum electrical power for the pressure transmitter through the following equation:
PPressure transmitter = UPressure transmitter � Imax. Current supply
The maximum electrical energy for the pressure transmitter (PPressure transmitter), which is now known, must be smaller than the permissible dissipation loss. If this is actually the case, both the power supply (UVoltage source) and the load (RLoad) were properly calculated and the electrical energy of the pressure sensor will be within the permissible range under all operating conditions. Consequently, the pressure transmitter will not heat too strongly and will withstand the mandatory operating temperatures.
Note
Should you need any advice, your contact will gladly assist you to.

Leave a Comment